manualshive.com logo in svg

Canon Satera LBP9500C, User Manual

Share
Download
Canon Satera LBP9500C User Manual Download Page 100

 

99

 

7

 

If the paper cannot be removed easily when it is jammed in the 
area shown in the figure, do not try to remove it forcefully but 
proceed to Step 8. 

IMPORTANT

 

If another message appears

 

If the following messages appear, clear the paper jam in the indicated area.

 

 

<

カセット 2 カバーエリア

 >, <

カセット 3 カバーエリア

 >

See "Clearing Paper Jams (Cassette 2/3 Cover Area)," on p. 100.

 

8

 

Close the right cover. 

 

 

When paper is jammed in the paper cassette, the jammed paper is output 
automatically.

The message disappears, and the printer is ready to print.

IMPORTANT

 

If a message does not disappear

 

Paper or pieces of paper may remain in the area surrounding the paper cassette.
See the following, pull out the paper cassette, and then remove the paper or pieces 
of paper. 
See "Checking Paper Jams in the Paper Cassette," on p. 104.

Summary of Contents for Satera LBP9500C








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands