manualshive.com logo in svg

Canon Satera LBP9500C, User Manual

Share
Download
Canon Satera LBP9500C User Manual Download Page 109

 

108

 

*

ブラック

  (black), 

イエロー

  (yellow), 

マゼンタ

  (magenta), or 

シアン

  (cyan) will appear in <Toner Colors>. (More than one 

color may appear.)

NOTE

 

Average yield of the toner cartridges

 

 

Replacement toner cartridges (standard capacity)
- Average yield of K (Black) toner cartridge: 6,500 pages
- Average yield of Composite C (Cyan), M (Magenta), and Y (Yellow) toner cartridges: 

7,500 pages

 

 

Replacement toner cartridges (high capacity)
- Average yield of K (Black) toner cartridge: 13,000 pages
- Average yield of Composite C (Cyan), M (Magenta), and Y (Yellow) toner cartridges: 

15,000 pages

<Toner Colors>*

トナー

を確認してください

 

When there is a 
possibility that a toner 
cartridge has reached 
the end of its life

- The printer stops printing.
- Pressing [  

] (

オンライン

 ) continues 

the job.

- As this may result in damage to the 

printer, it is recommended to replace 
the toner cartridge with a new one.

<Toner Colors>*

トナー

確認

 

When there is a 
possibility that a toner 
cartridge has reached 
the end of its life

- You can continue printing for a while, 

however, as this may result in damage 
to the printer, it is recommended to 
replace the toner cartridge with a new 
one.

<Toner Colors>*

トナー

との接続を確認してくださ
い

 

When there is a 
possibility that a toner 
cartridge is not installed 
properly

- The printer stops printing, and you 

cannot continue the job.

- Remove the toner cartridge of the 

indicated color, and then install it 
again.

- If a message appears even after the 

above procedure is performed, it is 
recommended to replace the toner 
cartridge with a new one.

<Toner Colors>*

トナー

をセットしてください。

 

When any of the toner 
cartridges is not 
installed

- Install the toner cartridge of the 

indicated color.

<Toner Colors>*

トナー

を正しくセットしてくださ
い。

 

When any of the toner 
cartridges are not 
installed properly

- Reinstall the toner cartridge of the 

indicated color.

<Toner Colors>*

トナー

がセットされている位置を
確認してください。

 

When the toner 
cartridges are not 
installed in the correct 
positions

- Reinstall the toner cartridge of the 

indicated color in the appropriate 
position.

 

Message

When it is Displayed

and Cause

Contents and Solutions

Summary of Contents for Satera LBP9500C








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands