manualshive.com logo in svg

Canon Satera LBP9500C, User Manual

Share
Download
Canon Satera LBP9500C User Manual Download Page 132

 

131

クリーニング用紙をセットし

てオンラインキーを押してく

ださい。

 

<Auto Error Skip>

Cause

The printer is waiting to print cleaning paper.

Solution

Load A4 or Letter size paper in the multi-purpose 
tray, and then press [  

] (

オンライン

 ).

定着器をセットしてください。

 

Cause 1

The fixing unit is not installed or is not installed 
properly.

Solution 1

Open the right cover and check if the fixing unit is 
installed.

Solution 2

Install the fixing unit again. If the message 
appears even after installing the fixing unit again, 
contact your local authorized Canon dealer for 
servicing.

Cause 2

The fixing unit for this printer is not installed.

Solution

Replace the fixing unit with that for this printer. 

排紙トレイがいっぱいです。
用紙を取り除いてください。

 

Cause

The output tray is filled to the limit.

Solution

Remove the paper in the output tray.

用紙がありません。

 

Cause

Paper of the size specified in the application is 
not loaded in the paper source (in all the paper 
sources when [

給紙モード

 ] is set to [

自動

 ] and in 

the specified paper source when the setting is 
fixed).

Solution 1

Refill or load paper. 

Solution 2

Press [

給紙選択

 ], and then select other paper 

source for the same paper size or larger paper 
size.

 

Message

Cause and Solution

Summary of Contents for Satera LBP9500C








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands