130
61 印刷設定エラーが発生し
ました。
Cause
Long-size paper was printed in the Super Fine
mode at 1200 dpi.
Solution 1
Perform the following procedure.
1. Perform a soft reset.
2. Set [
解像度
] to [
ファイン（600 dpi）
], and then
print again.
Solution 2
Press [
] (
オンライン
) to continue the next
printing. However, the page with which an error
has occurred is not printed.
回収トナー容器交換
Cause
The waste toner container is full.
Solution
Replace the waste toner container with a new
one.
回収トナー容器をセットして
ください。
Cause
The waste toner container is not installed or
installed improperly.
Solution
Set the waste toner container properly.
XXXX カバーを閉めて下さい
(XXXX shows the cover
name, or nothing is
displayed in XXXX.)
Cause
A cover is open.
Solution
Close the cover firmly. If the printer is not online,
press [
] (
オンライン
).
カラーモードをモノクロに変
更するか、用紙種類を変更し
てください
<Auto Error Skip>
Cause
You tried to perform color printing on
transparencies.
Solution
Perform the following procedure.
1. Perform a soft reset.
- "Canceling a Job" (See p. 119)
2. Perform black and white printing or print on
paper other than transparencies.
給紙できません。
Cause
Paper of the size or type that cannot be fed from
the multi-purpose tray or paper cassette is
specified.
Solution 1
If a paper source is specified, press [
給紙選択
],
and then set [
給紙モード
] to [
自動
].
Solution 2
Press [
給紙選択
] to select another paper source.
Solution 3
Load paper appropriate for the paper source.
- "Paper Requirements" (See p. 9)
Solution 4
Specify the following items.
デフォルト用紙種類
デフォルト用紙サイズ
Solution 5
Press [
] (
オンライン
), then print from the
currently selected paper source. However, this
may result in deterioration in print quality.
Message
Cause and Solution
