manualshive.com logo in svg

Canon REALiS WX450ST, User Manual, Page: 3 / 314

Share
Download
Canon REALiS WX450ST User Manual Download Page 3

3

How to Use This Manual

Copyright Notice

Please note that enlarging or reducing the size of an image for commercial 
purposes or public presentation may infringe on the legally protected copyright 
or the copyright holder of the original material.

About Trademarks

•

Ethernet is a registered trademark of Xerox Corporation.

•

Microsoft, Windows, Windows XP, Windows Vista, Windows 7, Windows 8 
and Aero are registered trademarks or trademarks of Microsoft Corporation 
in the United States and / or other countries.

•

Mac, Mac OS and Macintosh are trademarks of Apple Inc., registered in the 
United States and / or other countries.

•

HDMI, the HDMI logo and High-Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing, LLC.

•

PJLink is a registered trademark, or an application has been submitted for 
trademark, in Japan, the United States and / or other countries or regions.

•

AMX is a trademark of AMX Corporation.

•

Crestron®, Crestron RoomView®, and Crestron Connected™ are registered 
trademarks of Crestron Electronics, Inc.

Summary of Contents for REALiS WX450ST



























































































































































































































































































































Reviews:

No comments