Canon REALiS WX450ST, User Manual

Page: 190 / 314

Completing Computer Settings
190
Setting Projector Information [Projector info.]
From [Projector info.] in the settings screen, you can set the names and location
names which are used to identify projectors when multiple projectors are installed
on the network. For the setting procedure, refer to “Displaying the Network
Configuration Screen” (
P181 ).
Item Explanation Factory default setting
SNMP Select the SNMP function version. If
OFF is selected, the SNMP function
will be turned off and the other
settings in this screen cannot be
changed. OFF
Receive community Enter the community name which will
receive projector information in 1-byte
alphanumeric characters and symbols
(1 - 15 characters). <Blank>
Password Enter the community settings
password in 1-byte alphanumeric
characters and symbols (8 - 15
characters). It can be set only when
the SNMP version is V3. <Blank>
Confirm password For confirmation, enter the same
password as you entered in
[Password]. <Blank>
Item Explanation Factory default setting
Projector name Enter the projector name in 1-byte
alphanumeric characters and
symbols (1 - 63 characters). Canon Projector001
Location Enter the projector installation location
in 1-byte alphanumeric characters and
symbols (0 - 63 characters). <Blank>
Some characters such as # cannot be used for [Projector name] and [Location].