Canon REALiS 4K5020Z, User Manual

Page: 186 / 211

Projector Web Screen Menu
186
* When the interval is set to 0 seconds, repeated attempts to send mail are made
(as set in [Mail resend times]) without pausing between attempts.
Mail Authentication Settings
From [Mail auth] under [Mail] in the settings screen, you can configure the settings
for authentication of mail that is sent when an error occurs. For the setting
procedure, see “Network Setting” (
P73 ).
Sending a Test Mail
You can send a test mail to the mail address specified in [Mail] under [Mail] in the
settings screen by clicking [Send test mail] at the bottom of the screen.
Item Explanation Factory default setting
Mail authentication Select the mail authentication method. If
[OFF] is selected, the other mail
authentication settings cannot be
changed. OFF
User name Enter the user name to use for mail
authentication in 1-byte alphanumeric
characters and symbols (1 – 63
characters). <Blank>
Password Enter the password for mail
authentication in 1-byte alphanumeric
characters and symbols (1 – 63
characters). <Blank>
Confirm password For confirmation, enter the same
password as you entered in [Password]. <Blank>
IPv4 POP3 server IP
address Enter the POP3 server IP address
(IPv4) in 1-byte numbers. 0.0.0.0
IPv4 POP3 server port
number Enter the POP3 server port number
(IPv4) in 1-byte numbers (1 – 65535). 110
IPv6 POP3 server IP
address Enter the POP3 server IP address
(IPv6) in 1-byte numbers. <Blank>
IPv6 POP3 server port
number Enter the POP3 server port number
(IPv6) in 1-byte numbers (1 – 65535). 110
POP before SMTP
response time Enter the SMTP authentication timeout
period after POP3 authentication (unit:
milliseconds) using 1-byte numbers (0 –
9999 milliseconds). 300