Canon Puncher Unit-L1, Installation Procedure

Page: 26 / 40

Chapter 1
18
F-1-50
3) Mount the front fixing plate [1] and the rear fixing
plate [2] in place using 2 screws [3] each (binding;
M4x6).
<Finisher-Q1/Finisher-Q3/Saddle Finisher-Q2/
Saddle Finisher-Q4>
Use the fixing plate [1] FC5-4098 and [2] FC5-4076.
(They are included in the package of the puncher
unit.)
F-1-51
<Finisher-R1/Saddle Finisher-R2>
Use the fixing plate [1] FC5-4098 and [2] FC5-4076.
(They are included in the package of the puncher
unit.)
F-1-52
<Finisher-T1/Saddle Finisher-T2>
Use the fixing plate [1] 4A3-1923 and [2] 4A3-1922.
(They are included in the package of the finisher.)
F-1-53
1.3.4 Connecting to the
Host Machine
0003-0209
Check to make sure that the host machine is off and its
power plug is disconnected from the power outlet.
1) Remove the 3 screws [1], and detach the rear cover
[2] of the puncher unit.
F-1-54
2) In the case of the Finisher-Q1/Finisher-Q3/Saddle
Finisher-Q2/Saddle Finisher-Q4, mount the
included surface cover [1].
3) Connect the puncher unit to its host machine, and
secure the fixing plates (front and rear) using a
screw [2] (1 pc. each; stepped; M4).
<Finisher-Q1/Finisher-Q3/Saddle Finisher-Q2/
Saddle Finisher-Q4>
[2]
[2]
[1]
[1]
[2]
[3]
[3]
[1]
[2]
[3]
[3]
[1]
[2]
[3]
[3]
[1]
[2]