Canon Puncher Unit-L1, Installation Procedure

Page: 25 / 40

Chapter 1
17
1-12) Close the upper front cover [1].
F-1-45
<Finisher-R1/Saddle Finisher-R2>
1-1) Remove the 3 screws [1], and detach the left
cover [2] of the host machine. Cut off the 2 surface
covers [3] from the left cover; then, mount the left
cover to the machine.
F-1-46
<Finisher-T1/Saddle Finisher-T2>
1-1) Detach the copy tray if it is mounted on the
delivery assembly of the host machine.
1-2) Unscrew 3 screws [1] and detach the delivery
cover [2] of the host machine.
F-1-47
1-3) Unscrew 4 screws [1] and detach the left cover
[2] of the host machine. Cut away 2 blanking
covers [3] on the left cover using nippers and
attach the left cover and the delivery cover to the
host machine.
F-1-48
2) For the Finisher-R1 or the Saddle finisher-R2,
mount the upper/lower inlet guide.
For the Finisher-T1 or the Saddle finisher-T2, mount
the delivery guide.
<Finisher-R1/Saddle Finisher-R2>
Slide the inlet guides upper [1] and lower [2] along the
delivery assembly of the host machine, and fix them
in place using screws [3] (1 pc. each; tapping;
M4x12).
F-1-49
<Finisher-T1/Saddle Finisher-T2>
Fit 6 claws of the delivery guide [1] into the slots on
the delivery assembly [2] of the host machine.
[1]
[2]
[3]
[1]
[2]
[1]
[1]
[2]
[3]
[1]
[3]
[2]