Canon Powershot SX520 HS User Manual Download Page 272

Page: 272 / 315

272

Contents

On-Screen Messages

If an error message is displayed, respond as follows.

Capture or Playback

No memory card

●

The memory card may be inserted facing the wrong way. Reinsert the
memory card facing the correct way (

30).

Memory card locked

●

The write-protect tab of the memory card is set to the locked position.
Switch the write-protect tab to the unlocked position (

30).

Cannot record!

●

Shooting was attempted without a memory card in the camera. To shoot,
insert a memory card facing the correct way (

30).

Memory card error (

217)

●

If the same error message is displayed even after you have formatted a
supported memory card (

3) and have inserted it facing the correct

way (

30), contact a Canon Customer Support Help Desk.

Insufficient space on card

●

There is not enough free space on the memory card to shoot (

57,

99,

122,

153) or edit images (

194). Either erase

unneeded images (

184) or insert a memory card with enough free

space (

30).

Charge the battery (

28)

No Image.

●

The memory card does not contain any images that can be displayed.

Protected! (

178)

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands