Canon Powershot SX520 HS User Manual Download Page 192

Page: 192 / 315

192

Contents

Tagging Images as Favorites

Still Images

Movies

You can organize images by tagging them as favorites. By

choosing a category in filtered playback, you can restrict the

following operations to all of those images.

●

“Viewing” (

160), “V iewing Slideshows” (

174),

“Protecting Images” (

178), “Erasing Images” (

184),

“Adding Images to the Print List (DPOF)” (

253), “Adding

Images to a Photobook” (

259)

●

Press the [

] button, and

then choose [

] in the menu

(

50).

●

[Tagged as Favorite] is displayed.

●

To untag the image, repeat this
process and choose [

] again,

and then press the [

] button.

Using the Menu

Choose [Favorites].

●

Press the [

] button and

choose [Favorites] on the [

]

tab (

52).

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands