Canon Powershot SX520 HS, User Manual

Page: 157 / 315

157
ç
Contents
●
After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
● Screen brightness may change depending on your specified
shutter speed or aperture value. However, screen brightness
remains the same when the flash is up and the mode is set to [
].
● To have the setting you did not configure in step 2 (whether
shutter speed or aperture value) automatically adjusted to obtain
standard exposure, hold the shutter button halfway and press the
[
] button. Note that standard exposure may not be possible with
some settings.
●
With shutter speeds of 1.3 seconds or slower, ISO speed is [ ]
and cannot be changed.
●
[ ]: Manual
● Calculation of standard exposure is based on the specified
metering method (
=
126).