Canon Powershot SX520 HS User Manual Download Page 126

Page: 126 / 315

126

Contents

Changing the Metering Method

Still Images

Movies

Adjust the metering method (how brightness is measured) to suit
shooting conditions as follows.

●

Press the [

] button, choose

[

] in the menu, and choose the

desired option (

50).

●

The option you configured is now

displayed.

Evaluative

For typical shooting conditions, including
backlit shots. Automatically adjusts
exposure to match the shooting conditions.

Center
Weighted Avg.

Determines the average brightness of light
across the entire image area, calculated by
treating brightness in the central area as
more important.

Spot

Metering restricted to within the [

] (Spot

AE Point frame), displayed in the center of
the screen.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands