Canon Powershot SX520 HS User Manual Download Page 205

Page: 205 / 315

205

Contents

●

To overwrite the original movie with the cut one, choose
[Overwrite] in step 4. In this case, the original movie will be
erased.

●

If the memory card lacks sufficient space, only [Overwrite] will be

available.

●

Movies may not be saved if the battery pack runs out while saving
is in progress.

●

When editing movies, you should use a fully charged battery pack
or an AC adapter kit (sold separately,

225).

Editing Digest Movies

Still Images

Movies

Individual chapters (clips) (

61) recorded in [

] mode can be

erased, as needed. Be careful when erasing clips, because they
cannot be recovered.

Select the clip to erase.

●

Follow steps 1 – 2 in “Viewing
Short Movies Created When
Shooting Still Images (Digest
Movies)” (

164) to play a

movie created in [

] mode,

and then press the [

] button to

access the movie control panel.

●

Press the [ ][ ] buttons to
choose [

] or [

], and then

press the [

] button.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands