Canon Powershot SX520 HS User Manual Download Page 193

Page: 193 / 315

193

Contents

Choose an image.

●

Press the [ ][ ] buttons to
choose an image, and then press
the [

] button. [

] is displayed.

●

To untag the image, press the
[

] button again. [

] is no longer

displayed.

●

Repeat this process to choose
additional images.

Finish the setup process.

●

Press the [

] button.

A confirmation message is

displayed.

●

Press the [ ][ ] buttons to
choose [OK], and then press the
[

] button.

●

Images will not be tagged as favorites if you switch to Shooting

mode or turn the camera off before finishing the setup process in

step 3.

●

Favorite images will have a three-star rating (

)

when transferred to computers running Windows 8 or Windows 7.
(Does not apply to movies.)

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands