Canon Powershot SX520 HS User Manual Download Page 184

Page: 184 / 315

184

Contents

Erasing Images

Still Images

Movies

You can choose and erase unneeded images one by one. Be
careful when erasing images, because they cannot be recovered.
However, protected images (

178) cannot be erased.

Choose an image to erase.

●

Press the [ ][ ] buttons to
choose an image.

Erase the image.

●

Press the [ ] button.

●

After [Erase?] is displayed, press
the [ ][ ] buttons to choose
[Erase], and then press the [

]

button.

●

The current image is now erased.

●

To cancel erasure, press the
[ ][ ] buttons to choose [Cancel],
and then press the [

] button.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Canon Powershot SX520 HS, User Manual, Page: 184 / 315

Search results

Summary of Contents for Powershot SX520 HS

Reviews: