Canon Powershot SX520 HS User Manual Download Page 57

Page: 57 / 315

Contents

Shooting with Camera-

Determined Settings

For fully automatic selection of the optimal settings for specific

scenes, simply let the camera determine the subject and shooting
conditions.

Shooting (Smart Auto)

Still Images

Movies

Turn the camera on.

●

Press the power button.

●

The startup screen is displayed.

Enter [

] mode.

●

Set the mode dial to [

●

Aim the camera at the subject. The
camera will make a slight clicking
noise as it determines the scene.

●

Icons representing the scene
and image stabilization mode are
displayed in the upper right of the
screen (

65,

67).

●

Frames displayed around any
detected subjects indicate that
they are in focus.

Summary of Contents for Powershot SX520 HS




























































































































































































































































































































Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands

Canon Powershot SX520 HS, User Manual

Search results

Summary of Contents for Powershot SX520 HS

Reviews:

Related manuals for Powershot SX520 HS

Brands by name

Popular brands