Canon PowerShot S110 Digital ELPH, User Manual

Page: 158 / 346

158
Special Modes for Other Purposes
• Even if your face is not detected after you join the others in the shooting
area, the camera will shoot about 15 seconds later.
• To change the number of shots, press the < o >< p > buttons after choosing
[ ] in step 1. [Blink Detection] ( = 131) is only available for the final shot.
• You can also choose the shooting mode by choosing [ ] in steps 1 – 2 on
= 137, touching [ ] to access the setting screen, touching [ ], and then
touching the same item or [ ].
Still Images
High-Speed Continuous Shooting (High-speed
Burst HQ)
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
“Specifications” ( = 333).
HQ: High Quality
1
Choose [ ].
z z Follow steps 1 – 2 on = 137 and
choose [ ].
2
Shoot.
X X Hold the shutter button all the way down
to shoot continuously.
z z Shooting stops when you release the
shutter button or reach the maximum
number of shots, after which [Busy] is
displayed and the shots are shown in the
order you took them.
•
Focus, image brightness, and color are determined by the first shot.
• The screen is blank while you are shooting.
•
There may be a delay after continuous shooting before you can shoot again.
Note that some types of memory cards may delay your next shot even
longer.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
COP
Y