(11/37)
Error
code
TX /
RX
Meaning
Solution
(parts that are likely to be faulty)
##780 TX
After transmitting EOR-EOM in ECM transmission,
no significant signal has been received, and
re-transmission of the procedure signal has been
attempted the number of specified times but failed.
- Try a higher transmission level.
- Increase the transmission level of the
receiving machine.
##782 TX
After transmitting EOR-EOM in ECM transmission,
DCN has been received.
- Increase the transmission level of the
receiving machine.
##783 TX
After transmitting EOR-EOM in ECM transmission,
re-transmission of the procedure signal has been
attempted the number of specified times but failed,
or T5 time-over (60 sec.) has occurred.
- Increase the period of time of the T5
time-over.
##784 TX
After transmitting EOR-EOM in ECM transmission,
ERR has been received.
- Try a higher transmission level.
##785 TX
After transmitting EOR-EOP in ECM transmission,
no significant signal has been received, and
re-transmission of the procedure signal has been
attempted the number of specified times but failed.
- Try a higher transmission level.
- Increase the transmission level of the
receiving machine.
##787 TX
After transmitting EOR-EOP in ECM transmission,
DCN has been received.
- Try a higher transmission level.
##788 TX
After transmitting EOR-EOP in ECM transmission,
re-transmission of the procedure signal has been
attempted the number of specified times but failed,
or T5 time-over (60 sec.) has occurred.
- Increase the period of time of the T5
time-over.
##789 TX
After transmitting EOR-EOP in ECM transmission,
ERR has been received.
- Try a higher transmission level.
##790 RX
After receiving EOR-EOP in ECM reception, ERR
has been transmitted.
- Increase the transmission level of the
sending machine.
##791 TX /
RX
During the ECM mode procedure, a signal other
than a significant one has been received.
##792 RX
In ECM reception, PPS-NULL between partial
pages has not been detected.
- Increase the transmission level of the
sending machine.
##793 RX
During high-speed signal reception in ECM, no
effective frame has been detected, and a time-over
has occurred.
- Try a higher transmission level.
- Increase the transmission level of the
sending machine.
Summary of Contents for PIXMA MX340 Series
