(22/37)
3-3. User Mode
Function
Procedures
Remarks
Nozzle check pattern
printing
Perform via the printer operation
panel, or from the printer driver
Maintenance tab.
Set a sheet of plain paper (A4 or Letter) in
the rear tray.
Print head cleaning
Perform via the printer operation
panel, or from the printer driver
Maintenance tab.
Unclogging of the print head nozzles, and
maintenance to keep the print head
conditions good.
If there is a missing portion or white streaks
in the nozzle check pattern printout,
perform this cleaning.
Print head deep cleaning Perform via the printer operation
panel, or from the printer driver
Maintenance tab.
If print head cleaning is not effective,
perform this cleaning. Since the deep
cleaning consumes more ink than regular
cleaning, it is recommended to perform
deep cleaning only when necessary.
Automatic print head
alignment
Perform via the printer operation
panel.
Set a sheet of plain paper (A4 or Letter) in
the rear tray.
Manual print head
alignment
Perform from the printer driver
Maintenance tab.
Set 3 sheets of plain paper (A4 or Letter) in
the rear tray.
Print head alignment
value printing
Perform via the printer operation
panel, or from the printer driver
Maintenance tab.
Confirmation of the current print head
alignment values.
Paper feed roller
cleaning
Perform via the printer operation
panel, or from the printer driver
Maintenance tab.
The paper feed rollers rotate while being
pushed to the paper lifting plate. Since the
rollers will wear out in this cleaning, it is
recommended that you perform this only
when necessary.
Bottom plate cleaning
Perform via the printer operation
panel, or from the printer driver
Maintenance tab.
Cleaning of the platen ribs when the back
side of paper gets smeared.
Set a sheet of plain paper (A4 or Letter) in
the rear tray, then fold another sheet of
plain paper (A4 or Letter) crosswise in half,
unfold and set it over the other paper in the
rear tray with the folded ridge facing down.
Summary of Contents for PIXMA MX340 Series
