(24/37)
Whole Replacement is for heavy users since once Whole Replacement is performed, the printer
allows users to output approx.17, 000 pages. However, approx. 60 minutes is necessary to operate
Whole Replacement.
Difficulties
Print yield after replacement
Partial Replacement
Low (approx. 13 min.)
Approx. 10,000
Whole Replacement
High (approx. 60 min.)
Approx. 17,000
1) Partial replacement
Remove the Rear Cover Unit and Logic Board Ass'y, then replace the ink absorber.
(Time required: Approx. 13 min. including the operation check after replacement)
< How to perform the partial replacement >
i. Pull out the Rear Cover Unit, and remove 5 connectors from the Logic Board Ass'y, the
DCD board connector, 2 screws, 1 flexible cable, and 1 screw from the Side Cover R.
For your reference, see the red circles in the following photos below.
ii. Lifting the Logic Board Ass'y, pull out the ink absorbers (QC2-9603/QC2-9604) with a pair
of tweezers. For your reference, see the red circle in the following photo below (pull out A
first, and then B after sliding it to the location where absorber A was.).
Absorbers for Partial Replacement
A
B
Summary of Contents for PIXMA MX340 Series
