(30/37)
3-6. Notes on Transportation
1) In the service mode, press the ON button to finish the mode, and confirm that the paper lifting
plate of the rear tray is raised.
2) Keep the ink cartridges installed in the carriage. If the ink cartridge is removed from the printer
and left alone by itself, ink (the pigment-based black ink in particular) is likely to dry.
3) Turn off the printer to securely lock the carriage in the home position. (When the printer is
turned off, the carriage is automatically locked in place.) This is to prevent the carriage from
moving and applying stress to the carriage flexible cable, or causing ink leakage, during
transportation.
Apply grease from this side.
EJECT TRAY BACK
FD LINK A
MOLYKOTE PG-641
Over the entire surface where the cam slides:
9 to 18 mg
MOLYKOTE PG-641
MOLYKOTE PG-641
FD LINK
Sliding portion:
4.5 to 9 mg x 1 location
FD LINK C
MOLYKOTE PG-641
Sliding portions: 4.5 to 9 mg x 2 locations
Sliding portions: 4.5 to 9 mg x 2 locations
Summary of Contents for PIXMA MX340 Series
