Canon PIXMA MG3660, Online Manual

Page: 319 / 676

Quality & Media
This dialog allows you to create a basic print setup in accordance with the paper type. Unless special
printing is required, normal printing can be performed just by setting the items in this dialog.
Media Type
Select the type of media to be used.
You must select the type of media actually loaded in the printer. This selection enables the printer to
carry out printing properly for the material of the media used.
Note
• When printing on a double postcard, select Postcard Double for Paper Size, and then print again.
• If you print on paper other than hagaki, load the paper according to usage instructions, and then click
OK .
Paper Source
Shows the source from which paper is supplied.
Print Quality
Select the one that is closest to the original document type and the purpose.
When one of the radio buttons is selected, the appropriate quality will be set automatically.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality.
Draft
This setting is appropriate for test printing.
Custom
Select this radio button to specify a quality.
Quality
When you select Custom in Print Quality , you can use the slider bar to adjust the print quality
level.
319