Canon PIXMA GM4000 Series Online Manual Download Page 187

Page: 187 / 447

Note

• You cannot use the same printer name as that already used for other LAN connected devices.

• You cannot use a hyphen for the initial or last character of the printer name.

•

TCP/IP settings

Performs IPv4 or IPv6 setting.

•

WSD setting

Setting items when you use WSD (one of the network protocols supported in Windows).

◦

Enable/disable WSD

Selects whether WSD is enabled or disabled.

Note

• When this setting is enabled, the printer icon is displayed on the Network Explorer in

Windows.

◦

Optimize WSD-In

Selecting

Enable

allows you to receive the WSD printing data faster.

◦

WSD scan from dev.

Selecting

Enable

allows you to transfer the scanned data to the computer using WSD.

◦

Timeout setting

Specifies the timeout length.

•

Bonjour settings

Setting items when you use Bonjour.

◦

Enab./disab. Bonjour

Selecting

Enable

allows you to use Bonjour to perform the network settings.

◦

Enter service name

Specifies the Bonjour service name. You can use up to 48 characters for the name.

Note

• You cannot use the same service name as that already used for other LAN connected

devices.

•

LPR setting

Enables/disables the LPR setting.

•

RAW protocol

Enables/disables RAW printing.

•

LLMNR

Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting

Enable

allows the printer

to detect printer's IP address from the printer name without a DNS server.

•

DRX setting

187

Summary of Contents for PIXMA GM4000 Series
































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Related manuals for PIXMA GM4000 Series

Brands by name

Popular brands

Canon PIXMA GM4000 Series, Online Manual

Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Related manuals for PIXMA GM4000 Series

Brands by name

Popular brands