Canon PIXMA GM4000 Series Online Manual Download Page 149

Page: 149 / 447

Important

• Do not unplug the printer while the

lamp is lit or flashing, as it may cause malfunction or

damage to the printer, making the printer unable to print.

Open the scanning unit / cover again.

Remove the carriage stopper (A) and insert it all the way into the hole in the printer side.

Pull the carriage stopper forward while pulling it up and insert it in the same orientation.

10.

Close the scanning unit / cover gently.

11.

Retract output tray extension and paper output tray.

12.

Retract paper support, and then close rear tray cover.

13.

Close the operation panel.

14.

Unplug the printer cable from the computer and from the printer, then unplug the power
cord from the printer.

15.

Use adhesive tape to secure all the covers on the printer to keep them from opening during
transportation. Then pack the printer in the plastic bag.

Close and seal the opening of the bag with an object such as tape so as not to leak ink.

149

Summary of Contents for PIXMA GM4000 Series
































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Related manuals for PIXMA GM4000 Series

Brands by name

Popular brands

Canon PIXMA GM4000 Series, Online Manual

Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Related manuals for PIXMA GM4000 Series

Brands by name

Popular brands