Canon Pixma G1000 series, Online Manual

Page: 295 / 369

Paper Does Not Feed Properly/"No Paper" Error
Check1
Make sure paper is loaded.
Loading Paper
Check2
When loading paper, consider the following.
• When loading two or more sheets of paper, align the edges of the sheets before loading the paper.
• When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load
limit.
However, paper may not feed correctly at the maximum capacity, depending on the type of paper or
environmental conditions (very high or low temperature and humidity). In such cases, reduce the amount of
paper you load at a time to less than half of the paper load limit.
• Always load the paper in portrait orientation, regardless of the printing orientation.
• When you load the paper, place the print side facing UP and slide the paper guides to align with both sides
of the paper.
Loading Paper
Check3
Is paper too thick or curled?
Media Types You Cannot Use
Check4
When loading envelopes, consider the following:
When printing on envelopes, see Loading Paper , and prepare the envelopes before printing.
Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in
landscape orientation, they will not feed properly.
Check5
Make sure media type and paper size settings match with loaded paper.
Check6
Make sure there are not any foreign objects in rear tray.
If the paper tears in the rear tray, see Paper Jams to remove it.
295