Canon PIXM MX300 Series, User Manual

Page: 153 / 222

NO ANSWER The recipient's fax machine does not answer.
Check the number. Try dialing again after waiting
for a moment.
NO TONE DETECTED The telephone line cable with a modular plug is
not plugged in properly, or
DIAL TONE
DETECT
is set to
ON
. Make sure that the
cable is plugged in properly, and resend the fax
after a while. If you still cannot send the fax, set
DIAL TONE DETECT to OFF .
NO RX PAPER The other party's fax machine is out of paper or
its memory is full.
Contact the other party and have them load
paper in their fax machine or free up space in
their fax machine's memory.
NO TEL NUMBER The coded speed dialing code you entered has
not been registered.
Register the coded speed dialing code.
RECEIVED IN
MEMORY
If the machine receives a fax under one of the
following conditions, the machine will not be able
to print the received fax and will store it in its
memory.
When the problem is resolved as described, the
fax stored in memory is printed automatically.
Ink is low or has run out while receiving a
fax: replace the FINE Cartridge. See
Replacing a FINE Cartridge .
Paper size/type setting is incorrect: correct
the paper size/type setting.
Paper has run out while receiving a fax:
load the paper and press the
OK
button.
Output Tray is closed: open it.
OFF
is selected for
AUTO PRINT RX
:
select
ON
.
You pressed the Stop/Reset button to
cancel printing of a fax: press the
FAX
button.
TRY AGAIN IN B&W The recipient's fax machine is not color-
compatible. Press the
Black
button to resend
the faxes.
153