Canon PIXM MX300 Series User Manual Download Page 149

Page: 149 / 222

An Error Message Is Displayed on the LCD

If an error message is displayed on the LCD, take the corresponding action described below.

Message

Action

CHECK INK
U051/U052/U053/

U059

The FINE Cartridge may not be installed properly

or the Cartridge may not be compatible with this

machine.
Open the Scanning Unit (Printer Cover) and

install the appropriate FINE Cartridge.
If the error is not resolved, the FINE Cartridge

may be damaged. Contact your Canon service

representative.

CHECK INK
U075/U076

Make sure that each FINE Cartridge is installed

in the correct position.
See

Replacing a FINE Cartridge

CHECK INK
U140

The FINE Cartridge may not be compatible with

this machine. Install the appropriate FINE

Cartridge. See

Replacing a FINE Cartridge

CHECK INK
U150

The FINE Cartridge may not be installed

properly.
Open the Scanning Unit (Printer Cover) and

install the FINE Cartridge properly.
If the error is not resolved, the FINE Cartridge

may be damaged. Contact your Canon service

representative.

CHECK INK
U162

Ink may have run out.
The function for detecting the remaining ink level

will be disabled since the ink level cannot be

correctly detected.
If you want to continue printing without this

function, press the

Stop/Reset

button for at

least 5 seconds.
Canon recommends to use new genuine Canon

cartridges in order to obtain optimum qualities.
Please be advised that Canon shall not be liable

for any malfunction or trouble caused by

continuation of printing under the ink out

149

Summary of Contents for PIXM MX300 Series































































































































































































































Search results

Summary of Contents for PIXM MX300 Series

Reviews:

Brands by name

Popular brands

Canon PIXM MX300 Series, User Manual

Search results

Summary of Contents for PIXM MX300 Series

Reviews:

Brands by name

Popular brands