Canon Optura 300 Page 66 Instruction Manual Download

Page: 66 / 167

Using the Full Range

of Featur

Effects

Art (ART)

The image becomes like a paint (solarization).

Black and White (BLK & WHT)

The image becomes black and white.

Sepia (SEPIA)

The image becomes monochrome with a brownish tint.

Mosaic (MOSAIC)

The image is blurred through enlarging the size of some pixels.

Ball (BALL)

The image becomes like a ball.

Cube (CUBE)

The image becomes a cube and rotates.

Wave (WAVE)

Both ends of the image sway in waves.

Color Masking (COLOR M.)

The image becomes a rhombus surrounded by a masking frame that

changes the colors.

Mirror (MIRROR)

Creates a symmetrical image as if there would be a mirror in the

center of the screen.

Only Black and White can be used in CARD CAMERA mode.

Summary of Contents for Optura 300








































































































































































Search results

Summary of Contents for Optura 300

Reviews:

Related manuals for Optura 300

Brands by name

Popular brands

Canon Optura 300, Instruction Manual

Search results

Summary of Contents for Optura 300

Reviews:

Related manuals for Optura 300

Brands by name

Popular brands