Canon Optura 300 Page 69 Instruction Manual Download

Page: 69 / 167

Using the Full Range

of Featur

Capturing

10.Press the ON/OFF button.

• MANUAL: Images will be captured each time you press the ON/OFF button. The blue

frame indicating the next sequence disappears after the last image. To cancel the last

captured image, press and hold the ON/OFF button. To cancel the multi-image screen,

press and release the ON/OFF button.

• FAST, MODERATE, SLOW: The set number of images will be captured at the set speed.

To cancel the multi-image screen, press the ON/OFF button.

11.Press the start/stop button to begin recording.

The multi-image screen is recorded on the tape.

❍

The multi-image screen can be operated in record or record pause mode.

❍

You can operate the multi-image screen only in the following playback modes:
- When [S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse

playback

- When [S.SPEED] is set to [FAST], [MOD.] or [SLOW]: Playback pause

❍

The multi-image screen cannot be selected in Easy Recording, Night and Super
Night mode.

❍

The multi-image screen cannot be selected when 16:9 or Card Mix is activated.

❍

In PLAY (VCR) mode: Pressing any tape operation button (such as play or
pause), or performing date/photo search cancels the multi-image screen.

Summary of Contents for Optura 300








































































































































































Search results

Summary of Contents for Optura 300

Reviews:

Related manuals for Optura 300

Brands by name

Popular brands

Canon Optura 300, Instruction Manual

Search results

Summary of Contents for Optura 300

Reviews:

Related manuals for Optura 300

Brands by name

Popular brands