Canon Optura 300 Page 70 Instruction Manual Download

Page: 70 / 167

Using the Full Range

of Featur

Turning Off the Image Stabilizer

The image stabilizer allows you to obtain steady recordings even at telephoto. There is

no need to turn off the image stabilizer during normal recording. However, the

camcorder tries to compensate for horizontal movements and you may therefore

decide to turn it off during panning. The image stabilizer cannot be turned off when

the program selector is set to

[

Open the menu and select [CAMERA SET UP]. Select [IMAGE S.

], set it

to [OFF] and close the menu.

disappears.

❍

We recommend turning off the image stabilizer when you mount the
camcorder on a tripod.

❍

The image stabilizer is designed to compensate a normal degree of camcorder
shake.

❍

The image stabilizer cannot be used in CARD CAMERA mode.

❍

The image stabilizer cannot be used when [16:9] is set to [HIGH-RES.].

❍

The image stabilizer might not be as effective when recording in dark places
using the Night or Super Night mode.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

IMAGE S. •••ON

CAMERA SET UP

(

42)

Summary of Contents for Optura 300








































































































































































Search results

Summary of Contents for Optura 300

Reviews:

Related manuals for Optura 300

Brands by name

Popular brands

Canon Optura 300, Instruction Manual

Search results

Summary of Contents for Optura 300

Reviews:

Related manuals for Optura 300

Brands by name

Popular brands