manualshive.com logo in svg

Canon NP6551, Operator'S Manual

Share
Download
Canon NP6551 Operator'S Manual Download Page 218

8-4

Control Card V

The Control Card V enables you to manage copier usage more efficiently. The Control Card
V can monitor the copy quantity made by each card holder as well as all card holders, and
prevent unauthorized use of the copier.

■

Checking the Control Card

If the message to the right appears in the touch
panel display, make sure that a Control Card is
correctly inserted.
If a Control Card is correctly inserted, make sure
that the inserted Control Card is not a damaged
card, a card on which the copy total has reached
the maximum limit, or a card to which access
has been denied.

For information on how to operate the Control
Card V, see the “

Control Card V Instruction

Manual.”
If this message does not disappear after
correctly inserting a valid Control Card, contact
your service representative.

■

Control Card Printer-A1

Connect the Controll Card Printer-A1 to the
Control Card V and records of copier usage can
be produced for administrative purposes such as
cost-per-copy, cost-per-user, billing and
inventory.

Summary of Contents for NP6551





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands