manualshive.com logo in svg

Canon NP6551, Operator'S Manual

Share
Download
Canon NP6551 Operator'S Manual Download Page 127

3-30

R E P O R T

R E P O R T

R E P O R T

R E P O R T

R E P O R T

Transparency Interleaving Mode

(Interleaves Sheets of Paper Between Transparencies)

Use this mode when copying onto transparencies fed from the stack bypass. The copier
automatically interleaves a sheet of copy paper between each transparency. The interleaf
sheets protect the copied surface of the transparencies. The interleaf sheets can either be
printed with the same images as the transparencies or left blank.

Blank interleaf sheets selected in
the Transparency Interleaving mode

Printed interleaf sheets selected in
the Transparency Interleaving mode

Originals

Copies

Copies

Originals

Transparency

Transparency

Blank interleaf sheet

Printed interleaf sheet

NOTICE:

●

Set the One-sided mode before copying in the Transparency Interleaving mode.

MEMO:

●

You cannot make more than one set of copies at a time in the Transparency Interleaving
mode.

●

You cannot use the Transparency Interleaving mode with the Two-page Separation, Image
Combination, Image Separation, Cover/Sheet Insertion, Sheet Overlay, Book Overlay, 1

→

2-

sided, 2

→

2-sided or Book

→

2-sided modes.

●

Even if your copier is equipped with a Stapler Sorter, you cannot use any of the Sorter modes
with the Transparency Interleaving mode.

●

When copying interleaf sheets, those sheets are included in the count of the total number of
copies.

Summary of Contents for NP6551





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands