background image

3-22

Select the Auto Count function or specify the
number of originals.

If you want the originals to be counted
automatically, press the [OK] key.

MEMO:

If you place your originals in the RDF, the originals
are counted automatically. Counting is performed to
ensure that Image Combination is performed from
the first page of the originals.

5

Specifying the number of originals

Press the [CANCEL COUNT] key.
Specify the number of originals using the [+] and
[–] keys, or the Number keys (

1

 - 

0

), then

press the [OK] key.

• Press the [+] key to increase the number of

originals.

• Press the [–] key to decrease the number of

originals.

• To directly enter the number of originals, press

the Number keys (

1

 - 

0

).

MEMO:

You can change the number of originals entered
with the Number keys, using the [+] and [–] keys.

Press the [PAPER SELECT] key to manually
select the copy paper size. (See “Manual Paper
Selection,” on p. 2-24.)

NOTICE:

You cannot set Auto Paper Selection; manually
select a paper size (see p. 2-16).

MEMO:

The copier automatically selects the copy ratio
depending on the selected paper size (Auto Zoom).

After you have finished making the settings,
press the [DONE] key .

6

Proceed to copy in the usual way.
(See “Making Copies,” on p. 2-4.)

MEMO:

To cancel the settings, press the 

Reset

 key.

(The copier returns to the Standard mode.)

Summary of Contents for NP6551





































































































































































































































Reviews: