Canon NP6218, Service Handbook

Page: 61 / 94

CHAPTER 4 SERVICE MODE
A. Outline
The copier’s service mode may be classified into the following six:
Table 4-1
B. Using Service Mode
1. Activating Service Mode
1) Open the front door, and insert the door switch actuator.
• If you want to make checks for I/O display mode or the like while making copies,
set the copy mode.
2) Press the service mode switch (SW302) on the DC controller with hex key.
• The copy count indicator indicates [1].
• While service mode is activated, the copy density indicator LED indicates the
position of the fixing belt.
• A press on the reset key de-activates service mode.
Figure 4-1
CHAPTER 4 SERVICE MODE
4-1
Item
[
1
]
[
2
]
[
3
]
[
4
]
[
5
]
[
6
]
Description
control display mode
I/O display mode
adjustment mode
operation/inspection mode
specification mode
counter mode
4