Canon NP6218 Service Handbook Download Page 18

Page: 18 / 94

2. Adjusting the Mirror Position (optical distance between No. 1 mirror and No.

2/No. 3 mirror)

1) Keep the mirror positioning tool handy.

(See “4 Assembling the Mirror Positioning Tool on P. 2-13.”)

2) Move the No. 1 mirror mount forward, and match the long hole in the front side plate

and the cable fixing screw

Figure 2-13

3) Loosen the set screw on the pulley.
4) Set the mirror positioning tool

to the No. 1 mirror mount and the No. 2 mirror mount

(both front and rear).

Figure 2-14

5) Attach the scanner cable fixing to the No. 1 mirror mount using two screws

(both

front and rear).

Figure 2-15

CHAPTER 2 STANDARDS AND ADJUSTMENTS

2-12

(front)

(rear)

(front)

Mirror positioning tool (front)

Mirror positioning tool (rear)

(front)

(rear)

Summary of Contents for NP6218






























































































Search results

Summary of Contents for NP6218

Reviews:

Related manuals for NP6218

Brands by name

Popular brands

Canon NP6218, Service Handbook

Search results

Summary of Contents for NP6218

Reviews:

Related manuals for NP6218

Brands by name

Popular brands