Canon NP6218, Service Handbook

Page: 26 / 94

7) Fix the harness in place using two SK binders (WT2-5145; front, rear)
t
; then, insert
it into the transfer guide.
Caution:
When fixing the harness in place, make sure that the cap portions of the terminals
alternate; keeping them in parallel will bring them in contact with the transfer roller.
8) Fix the harness with two SK binder
t
(front, rear) in place, and insert it into the
transfer guide.
Figure 2-29
9) Connect the connector
y
as shown in Figure 2-30.
Figure 2-30
Caution:
When attaching the transfer guide to the copier after attaching the drum heater,
make sure that the spring at the rear is firmly in the groove.
CHAPTER 2 STANDARDS AND ADJUSTMENTS
2-20