Canon MVX100 Instruction Manual Download

Page: 149 / 160

149

Additional

Information

Troubleshooting

If you have a problem with your camcorder, refer to this checklist. Consult your dealer

or a Canon Service Centre if the problem persists.

Power Source

Recording/Playback

Camcorder is not turned on.

Cassette is not loaded.

Battery pack is exhausted.

Condensation is detected.

Camcorder stopped
operating to protect the
tape.

Camcorder and wireless
controller are not set to the
same remote sensor mode.

Batteries of the wireless
controller are exhausted.

Turn on the camcorder.

Load a cassette.

Replace or charge the
battery pack.

See reference page.

Unload and reload the
cassette.

Change the remote sensor
modes.

Replace the batteries.

Buttons will not work.

flashes on the

screen.

flashes on the screen.

“Remove the cassette”
appears on the screen.

The wireless controller
will not work.

147

Problem

Cause

Solution

Battery pack is exhausted.

Battery pack is not correctly
attached.

Battery pack is exhausted.

Power save function has
been activated.

Battery pack is exhausted.

Cassette compartment cover
is not fully open.

Battery pack is exhausted.

The camcorder
malfunctions.

Battery pack is exhausted.

Replace or charge the
battery pack.

Attach the battery pack
correctly.

Replace or charge the
battery pack.

Turn on the camcorder.

Replace or charge the
battery pack.

Open the cassette
compartment cover fully.

Replace or charge the
battery pack.

Consult a Canon Service
Centre.

Replace or charge the
battery pack.

Camcorder will not turn
on.

The camcorder switches
off by itself.

Cassette compartment
will not open.

Cassette compartment
stopped during loading/
unloading.

LCD/viewfinder switches
on and off.

–

6_D74PAL_E(139-159) 03.1.27 7:50 PM Page 149

Summary of Contents for MVX100

































































































































































Search results

Summary of Contents for MVX100

Reviews:

Related manuals for MVX100

Brands by name

Popular brands

Canon MVX100, Instruction Manual

Search results

Summary of Contents for MVX100

Reviews:

Related manuals for MVX100

Brands by name

Popular brands