manualshive.com logo in svg

Canon MVX100, Instruction Manual

Share
Download
Canon MVX100 Instruction Manual Download Page 82

82

Using the Full Range 

of Featur

es

E

Magnifying the Image 

The playback image can be magnified up to 5 times. 

1. Move the zoom lever toward 

T

.

• The image is magnified by 2 times.

• To further enlarge the image, move the zoom lever toward 

T

.

To shrink the image below 2 times magnification, move the

zoom lever toward 

W

.

• A frame appears indicating the position of the enlarged part.

2. Move the image.

• Turn the selector dial to move the image to the right and left,

or up and down. Pressing the selector dial switches between

the directions. 

• To cancel the magnification, move the zoom lever toward 

W

until the frame

disappears.

Movies played back from a memory card cannot be magnified.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

 3_D74PAL_E(42-86)  03.1.27 7:27 PM  Page 82

Summary of Contents for MVX100

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands