Canon MVX100 Instruction Manual Download

Page: 87 / 160

Editing

Recording to a VCR or Digital Video Device

You can copy your recordings by connecting the camcorder to a VCR or a digital video

device. If you connect a digital video device, you can copy recordings with virtually no

generation loss in image and sound quality.

When connecting a VCR:

❍

Make sure that “

” is not displayed on the screen. If “

” is displayed, change

the setting (

69).

❍

The quality of the edited tape will be slightly lower than that of the original.

When connecting a digital video device:

❍

You can connect only one device to the camcorder with the DV cable.

❍

Blank sections may be recorded as anomalous picture.

❍

If the picture does not appear, reconnect the DV cable or turn the camcorder
off and back on again.

Example: Recording to a VCR

1. Connect the camcorder to the VCR.

See

Playing Back on a TV Screen

(

38).

2. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.

3. Connected device: Load a blank cassette and set the device to record

pause mode.

4. Locate the scene you wish to copy and pause playback shortly before

the scene.

5. Play back the tape.

6. Connected device: Begin recording when the scene you wish to copy

appears. Stop recording when copying is complete.

7. Stop playback.

CARD CAMERA

PLAY (VCR)

CAMERA

4_D74PAL_E(87-99) 03.1.28 2:26 PM Page 87

Summary of Contents for MVX100

































































































































































Search results

Summary of Contents for MVX100

Reviews:

Related manuals for MVX100

Brands by name

Popular brands

Canon MVX100, Instruction Manual

Search results

Summary of Contents for MVX100

Reviews:

Related manuals for MVX100

Brands by name

Popular brands