Canon MVX100 Instruction Manual Download

Page: 86 / 160

Using the Full Range

of Featur

Returning to a Pre-marked Position

If you wish to return to a particular scene

later, mark the point with the zero set

memory and the tape will stop at that point

when you rewind/fast forward the tape.

1. Press the ZERO SET MEMORY button at the point

you wish to return to later.

• “0:00:00

” appears.

• To cancel, press the ZERO SET MEMORY button again.

2. When you have finished playback, fast forward or

rewind the tape.

• “RTN

” or “

RTN” appears.

• The tape stops automatically at “0:00:00”.

• The tape counter changes to time code.

❍

Time code and tape counter display may not match accurately.

❍

The zero set memory may not function correctly when blank sections exist on
the tape.

❍

If you remove the tape, the zero set memory is cancelled and the counter
display shows the time code.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

REW

PLAY

STOP

ZERO SET

MEMORY

12bit

AUDIO OUT

SEARCH SELECT

DATA CODE

INDEX SLIDE SHOW

CARD

ZERO SET
MEMORY
button

REW

button

PLAY

button

STOP

button

3_D74PAL_E(42-86) 03.1.27 7:27 PM Page 86

Summary of Contents for MVX100

































































































































































Search results

Summary of Contents for MVX100

Reviews:

Related manuals for MVX100

Brands by name

Popular brands

Canon MVX100, Instruction Manual

Search results

Summary of Contents for MVX100

Reviews:

Related manuals for MVX100

Brands by name

Popular brands