Canon MVX100 Instruction Manual Download

Page: 25 / 160

Mastering

the Basics

2. Turn the selector dial to select [SYSTEM] and press

the selector dial.

3. Turn the selector dial to select [D/TIME SET] and

press the selector dial.

The year display starts to flash.

4. Turn the selector dial to select the year, and press the selector dial.

• The next part of the display starts flashing.

• Set the month, day, hours and minutes in the same way.

5. Press the MENU button to close the menu and to

start the clock.

Time zone, date and time appear for 4 seconds each time you

turn the power on.

❍

To change a part of the date or time, press the selector dial at step 4, and
move to the part you wish to change.

❍

The date can be set to any year between 2003 and 2030.

Displaying Date and Time during Recording

You can display time zone, date and time in the lower left corner of the screen (the

time zone disappears after 4 seconds). The 4-second display will no longer appear

when you turn the power on. The date and time display will not be superimposed on

your recordings.

1. Press the MENU button to open the menu.

2. Turn the selector dial to select [DISPLAY SET UP] and

press the selector dial.

3. Turn the selector dial to select [D/T DISPLAY] and

press the selector dial.

4. Turn the selector dial to select [ON].

5. Press the MENU button to close the menu.

CARD PLAY (VCR)

CARD CAMERA

PLAY (VCR)

CAMERA

D/T DISPLAY••OFF

DISPLAY SET UP

(

42)

2_D74PAL_E(13-41) 03.1.27 7:15 PM Page 25

Summary of Contents for MVX100

































































































































































Search results

Summary of Contents for MVX100

Reviews:

Related manuals for MVX100

Brands by name

Popular brands

Canon MVX100, Instruction Manual

Search results

Summary of Contents for MVX100

Reviews:

Related manuals for MVX100

Brands by name

Popular brands