Canon MV6iMC Instruction Manual Download Page 95

Page: 95 / 171

Editing

1. On the VCR, locate a point 3 seconds before the scene to be

inserted. Set the VCR to playback pause mode.

2. On the camcorder, press PLAY and locate the recording start

point. Set the camcorder to playback pause mode.

• You can use the playback buttons on the body of the camcorder or the

special playback functions on the wireless controller in the same way as in
playback mode.

3. Press the AV INSERT button.

• AV INSERT and

appear in the display.

4. Play back the tape in the VCR.

5. To start inserting, press the PAUSE button on the camcorder.

•

changes to

6. To stop inserting, press the STOP button on the camcorder.

• Inserting stops and AV INSERT disappears from the display. The camcorder

returns to stop mode.

• If instead of pressing STOP you press PAUSE, the camcorder returns to the

AV insert pause mode.

• If you set the zero set memory at the position on the tape where you want to

stop inserting, every time you return to that point, the camcorder will cancel
its AV inserting and enter stop mode.

7. Stop playback on the VCR.

Editing

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV6iMC












































































































































































Search results

Summary of Contents for MV6iMC

Reviews:

Related manuals for MV6iMC

Brands by name

Popular brands

Canon MV6iMC, Instruction Manual

Search results

Summary of Contents for MV6iMC

Reviews:

Related manuals for MV6iMC

Brands by name

Popular brands