Canon MV6iMC Instruction Manual Download

Page: 111 / 171

111

Using a Memory Card

Recording

1. Start playback on the other device.

2. When the image you want to record appears in the display, press

the PHOTO button halfway down and hold it.

• The image appears as a still image in the display.
• The number of images that can still be recorded on the memory card

appears in the display.

3. Press the PHOTO button fully down to record the image to the

memory card.

• The card access indicator flashes.

Notes:

• When dubbing to a tape via the DV terminal, make sure that AV

DV is not

displayed on the screen. If so, set AV

DV OUT to OFF in the menu (

92).

• If you record an image onto a memory card that was originally recorded in the

16:9 mode for wide screen TV’s, the image will appear to be vertically
“squashed” (compressed).

• The shutter sound doesn’t sound in PLAY(VCR) mode.

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV6iMC












































































































































































Search results

Summary of Contents for MV6iMC

Reviews:

Related manuals for MV6iMC

Brands by name

Popular brands

Canon MV6iMC, Instruction Manual

Search results

Summary of Contents for MV6iMC

Reviews:

Related manuals for MV6iMC

Brands by name

Popular brands