Canon MV6iMC Instruction Manual Download Page 121

Page: 121 / 171

121

Using a Memory Card

●

Erasing still images/movies

Erase still images/movies singly or all at once.
• You cannot erase protected still images/movies. Cancel image protection first in

order to erase an image.

• Erase still images/movies with caution. Once a still image/movie has been erased, it

cannot be restored.

There are 2 ways to erase a single still image/movie.

To erase still images/movies one at a time

➡

File Operation menu

(

122)

To erase still images/movies one at a time or erase all still images/movies on the
memory card at once

➡

Card Operations submenu

(

126)

: When playing back still images/movies in CARD PLAY (VCR) mode

: When displaying an index screen in CARD PLAY (VCR) mode

INDEX

SINGLE

CARD PLAY (VCR)

SINGLE

CARD PLAY (VCR)

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV6iMC












































































































































































Search results

Summary of Contents for MV6iMC

Reviews:

Related manuals for MV6iMC

Brands by name

Popular brands

Canon MV6iMC, Instruction Manual

Search results

Summary of Contents for MV6iMC

Reviews:

Related manuals for MV6iMC

Brands by name

Popular brands