manualshive.com logo in svg

Canon MG3600 series, Online Manual

Share
Download
Canon MG3600 series Online Manual Download Page 456

Initial Check Items

Before running 

Nozzle Check

, check that the printer power is on, and open the cover of the printer.

Check the following items for each ink.

•

Check the amount of ink

 remaining in the cartridge.

• Make sure that you push in the ink cartridge completely until you hear a clicking sound.
• If an orange tape is adhered to the ink cartridge, peel it off completely.

Any remaining tape will hinder ink output.

• Check that the ink cartridges are installed in their correct positions.

Ink Cartridge Settings dialog box

When you click 

Ink Cartridge Settings

, the 

Ink Cartridge Settings

 dialog box is displayed.

This feature enables you to specify the most appropriate FINE cartridge among installed cartridges
according to an intended use.
When one of the FINE cartridges becomes empty and cannot be replaced immediately by a new one, you
can specify the other FINE cartridge that still has ink and continue printing.

Ink Cartridge

Selects the FINE cartridge you use for printing.

Color Only

Uses the color FINE cartridge only.

Black Only

Uses the black FINE cartridge only.

Both Black and Color

Uses the FINE cartridges installed on the printer, which are color and black.

Important

• When the following settings are specified, 

Black Only

 does not function because the printer

uses the color FINE cartridge to print documents.

• Other than 

Plain Paper

, 

Envelope

, 

Ink Jet Hagaki (A)

, 

Hagaki K (A)

, 

Hagaki (A)

, or

Hagaki

 is selected for 

Media Type

 on the 

Main

 tab

•

Borderless

 is selected from the 

Page Layout

 list on the 

Page Setup

 tab

• Do not detach the FINE cartridge that is not in use. Printing cannot be performed while either

FINE cartridge is detached.

Auto Power Settings dialog box

When you click 

Auto Power

, the 

Auto Power Settings

 dialog box is displayed.

This dialog box allows you to manage the printer power from the printer driver.

Auto Power On

Selects the auto power-on setting.
Specify 

Disable

 to prevent the printer from turning on automatically when print data is sent to it.

Make sure the printer is on and then click 

OK

 to change the printer settings.

Specify 

Enable

 to turn the printer on automatically when print data is sent to it.

Auto Power Off

Selects the auto power-off setting.
If a printer driver operation or a printer operation is not performed within the specified time, the printer
turns off.

456

Summary of Contents for MG3600 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands