Canon MG3600 series Online Manual Download Page 289

Page: 289 / 910

Canon IJ Network Tool Screen

This section describes the items and menus displayed on the

Canon IJ Network Tool

screen.

Items on Canon IJ Network Tool Screen

Canon IJ Network Tool Menus

Items on Canon IJ Network Tool Screen

The following item is displayed on the

Canon IJ Network Tool

screen.

Printers:

The printer name, status, printer model name, and port name are displayed.

A check mark next to the printer in the

Name

list indicates it is set as the default printer.

Configuration changes are applied to the selected printer.

Update

Performs printer detection again. Click this button if the target printer is not displayed.

Important

• To change the printer's network settings using IJ Network Tool, it must be connected via a LAN.

• If

No Driver

is displayed for the name, associate the port with the printer.

When Printer Driver Is Not Associated with Port

• If

Not Found

is displayed for the status, check the followings:

• The wireless router is turned on.

• When using wired LAN, the LAN cable is connected properly.

• If the printer on a network is not detected, make sure the printer is turned on and click

Update

It may take several minutes to detect printers. If the printer is not yet detected, connect the
machine and the computer with a USB cable and click

Update

• If the printer is being used from another computer, a screen is displayed informing you of this

condition.

289

Summary of Contents for MG3600 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MG3600 series

Reviews:

Brands by name

Popular brands

Canon MG3600 series, Online Manual

Search results

Summary of Contents for MG3600 series

Reviews:

Brands by name

Popular brands