Canon MF512 Series User Manual Download Page 906

Page: 906 / 913

Notice

0Y9U-0H0

◼

Third Party Services and Software

Third Party Software

◼

EMC requirements of EC Directive

This equipment conforms with the essential EMC requirements of EC Directive. We declare that this product conforms

with the EMC requirements of EC Directive at nominal mains input 230 V, 50 Hz although the rated input of the product

is 220 to 240 V, 50/60 Hz. Use of shielded cable is necessary to comply with the technical EMC requirements of EC

Directive.

◼

Laser Safety Information

Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this equipment

is hermetically sealed within the protective housing and external cover. No radiation can leak from the machine in the

normal operation of the product by the user.

This machine is classified as a Class 1 Laser Product under IEC60825-1: 2007, EN60825-1: 2007.

◼

220 to 240 V Model

The label shown below is attached to the laser scan unit on the machine.

This machine has been classified under IEC60825-1: 2007, EN60825-1: 2007 and conforms to the following classes:

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

Appendix

897

Summary of Contents for MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MF512 Series

Reviews:

Canon MF512 Series, User Manual, Page: 906 / 913

Search results

Summary of Contents for MF512 Series

Reviews: