Canon MF512 Series User Manual Download Page 865

Page: 865 / 913

Paper

0Y9U-0F6

◼

Supported Paper Sizes

Paper sizes that can be loaded in the paper drawer, the multi-purpose tray, and optional paper feeders are listed

below.

: Available

: Unavailable

Paper Size

Paper Drawer Multi-Purpose Tray Automatic 2-Sided Printing

(210.0 x 297.0 mm)

(182.0 x 257.0 mm)

(148.0 x 210.0 mm)

Legal (LGL)

(215.9 x 355.6 mm)

Letter (LTR)

(215.9 x 279.4 mm)

Statement (STMT)

(139.7 x 215.9 mm)

Executive (EXEC)

(184.1 x 266.7 mm)

Oficio

(215.9 x 317.5 mm)

Oficio (Brazil)

(215.9 x 355.0 mm)

Oficio (Mexico)

(215.9 x 341.0 mm)

Letter (Government)

(203.2 x 266.7 mm)

Legal (Government)

(203.2 x 330.2 mm)

Automatic 2-sided printing is available without necessity of paper reloading.

The machine can print received fax documents.

Custom size paper with width 105.0 to 216.0 mm and length 148.0 to 356.0 mm can be loaded.

Custom size paper with width 76.2 to 216.0 mm and length 127.0 to 356.0 mm can be loaded.

Custom size paper with width 210.0 to 216.0 mm and length 279.4 to 356.0 mm can be loaded.

Appendix

856

Summary of Contents for MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MF512 Series

Reviews:

Canon MF512 Series, User Manual, Page: 865 / 913

Search results

Summary of Contents for MF512 Series

Reviews: