manualshive.com logo in svg

Canon MF512 Series, User Manual, Page: 813 / 913

Share
Download
Canon MF512 Series User Manual Download Page 813

6

Place the adjustment sheet on the platen glass, with the printed side face down.

●

Place the adjustment sheet so that the black line (

) is toward the left side of the machine.

7

Gently close the feeder.

8

Press  .

➠

The adjustment image is scanned and adjustment starts. In approximately 8 seconds, the adjustment is
finished.

9

Open the feeder, and remove the adjustment image.

10

Gently close the feeder.

 

If the <Could not perform correction.> message is displayed

●

Did you load plain/recycled/heavy paper or label of A4 or Letter size?

●

Did you place the adjustment sheet on the platen glass with the adjustment image printed side face down,
with the black line toward the left side of the machine?

●

Has a paper jam occurred?  Clearing Jams(P. 722)

●

Is the amount remaining in toner cartridge required for correction sufficient? If the amount remaining in a
toner cartridge is low, it is recommended that you replace toner cartridges.  Checking the Amount
Remaining in the Toner Cartridge(P. 794)

Maintenance

804

Summary of Contents for MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments